• Tel:0086-0755-2985 1810
  • Mob:0086-137 1431 6361
  • E-mail:eddie@okagv.com
  • Address:Building 14, Zhongliang Fuan Industrial Zone, Dayang Road, Fuyong, Baoan, Shenzhen. PRC.

Select this key, enter setting interface by pressing confirm. Use up and down key to select PC control or Manual control. For PC control, computer control software will set the vehicle route.For Manual control, operator controls the vehicle and sets route by keys and monitor on the vehicle.
The  default setting is the Manual control, press the confirm key and exit setting when selection accomplished.
Station setting
Select this key, enter setting interface by pressing confirm. AGV control software support 8 vehicles to build a AGV system. As for this system has only one AGV, so the default station is 0#, no need for setting.
Gear speed setting
Adjust actual speed of every gear by pressing this key. In this system, the first and forth gear are fixed, which cannot be changed by shifting. The second and third can be adjusted and set to change the actual speed for specific gear.
Button function introduction
To look over all functions of the key on the keyboard by pressing this key. To quit by cancel key after entering.
 
Map demonstration
To check the AGV route by pressing this key. To quit by cancel key after entering.
Configuration confirmation
To enter duty mode interface by pressing confirm key after all configuration input completed.

For reproduction, please specify from this website:http://www.okagv.com/Technical_Info_14772005.html


Issued date:2013年04月12日 page views:

Previous:Design and pickup of AGV bevel gear       Next:Communication protocol of AGV computer

ShenZhen OKAGV Company Limited 2012-2013 All Rights Reserved

Address: Building 14, Zhongliang Fuan Industrial Zone, Dayang Road, Fuyong, Baoan, Shenzhen. China.
Tel:0086-0755-2985 1810 E-mail:eddie@okagv.com xml sitemap